7 Product-specific CAN objects XN300 slice modules7.20 XN-322-8AIO-U2254 Gateway XN-312-GW-CAN 06/16 MN050003-EN www.eaton.eu7.20.4 Analog Input Global Interrupt Enable (Object 0x6423)Object 0x6423 enables and disables the transmission of data via object0x6401 in general.Default value• FALSE (0)Object 0x6401 is not enabled and cannot transmit any analog input val-ues.• TRUE (1)Object 0x6401 is enabled and can transmit analog input values.7.20.5 Analog Input Interrupt Upper Limit Integer (Object 0x6424)Object 0x6424 defines an upper limit and affects the transmission of object0x6401 accordingly ￫ Figure 78, page 250.Object 0x6401 will be transmitted (CAN transmission) if all of the followingconditions are met:7 6 5 4 3 2 1 0– – CLASS CLASS CLASS TYPE TYPE TYPEData bit Desig-nationDescription0 0 = Upper limit not exceeded1 = Upper limit exceeded1 0 = Input not below lower limit1 = Input below lower limit2 0 = Input not changed by more than delta1 = Input changed by more than delta3 0 = Input not reduced by more than negative delta1 = Input reduced by more than negative d4 0 = Input not reduced by more than positive delta1 = Input reduced by more than positive delta5 – 7 reservedFeature Description / Value EDSName Analog Input Global Interrupt Enable [MxFixed6423]ParameterName=AnalogInputGlobalInterruptEnableObjectType=0x7DataType=0x0001AccessType=rwDefaultValue=0PDOMapping=0Description AnalogInputGlobalInterruptEnableObject Code VariableMapping SDOData type BOOLEANAccess rwDefault value FALSEObject Code Variable
