7 Product-specific CAN objects XN300 slice modules7.23 XN-322-2DMS-WMGateway XN-312-GW-CAN 06/16 MN050003-EN www.eaton.eu 309Byte 0:Byte 1:7.23.6 Range Configuration Channel x (Object 0x5061, 0x5063)Objects 0x5061 and 0x5063 can be used to configure the range or input gainfor a channel.Design of the data bytes:1 Byte Byte 0:Sub index1≦n≦254B15B14B13B12B11B10B9B8B7B6B5B4B3B2B1B0MSBLSBData bit Desig-nationDescription0 – 7 Filter depth of ADC 1–1023 (Default = 1)Data bit Desig-nationDescription0 – 1 Filter depth of ADC 1–1023 (Default = 1)2 0 ≧ SINC4 Filter (Default)1 ≧ SINC3 Filter3 – 5 0 = Continuous conversion mode (default)1 – 5 = reserved6 = System zero-scale calibration7 = System full-scale calibration6 – 7 reservedFeature Description / Value EDSName RangeConfig Channelx [MxSubExt506x]ParameterName=RangeConfigChannelxObjectType=0x7DataType=0x0006AccessType=rwDefaultValue=3PDOMapping=0Count=1Description RangeConfigChannel1 Object 0x5061RangeConfigChannel2 Object 0x5063Object Code ARRAYMapping SDOData type UNSIGNED16Sub index 01 … FE hexAccess rwDefault value 0003 hex
