port-channelnumberEnter the keywords port-channel then an existing LAGnumber. Enter this keyword/variable combination twice,identifying the two paired LAGs.Defaults noneCommand Modes PORT-CHANNEL FAILOVER-GROUP (conf-po-failover-grp)Command History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series ExaScale.7.6.1.0 Introduced on the C-Series, E-Series, and S-Series.RelatedCommandsport-channel failover-group — accesses PORT-CHANNEL FAILOVER-GROUP mode toconfigure a LAG failover group.show interfaces port-channel — displays information on configured Port Channelgroups.interface port-channelCreate a Port Channel interface, which is a link aggregation group (LAG) containing sixteen physical interfaceson the switch.C9000 SeriesSyntax interface port-channel channel-numberTo delete a Port Channel, use the no interface port-channel channel-numbercommand.Parameters channel-number For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.Interfaces 1020
