If the next-hop address in the ARP cache ages out for a route tracked for itsreachability, an attempt is made to regenerate the ARP cache entry to if the next-hopaddress appears before considering the route DOWN.RelatedCommands • show track ipv6 route – displays information about tracked IPv6 routes, includingconfiguration, current state, and clients which track the route.• track ipv6 route reachability – configures object tracking on the reachability of anIPv4 route.track resolution ipv6 routeConfigure the protocol-specific resolution value used to scale an IPv6 route metric.C9000 SeriesSyntax track resolution ipv6 route {isis resolution-value | ospfresolution-value}To return to the default setting, use the no track object-id command.Parameters object-id Enter the ID number of the tracked object. The range is from 1to 500.isis resolution-valueEnter the resolution used to convert the metric in the routingtable for ISIS routes to a scaled metric.ospf resolution-valueEnter the resolution used to convert the metric in the routingtable for OSPF routes to a scaled metric.Defaults noneCommand Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.8(0.0) Introduced on the S3048-ON and S4048-ON.9.7(0.0) Introduced on the S6000-ON.8.3.12.0 Introduced on the S4810.8.4.1.0 Introduced.Object Tracking 1479
