peer-group-name (OPTIONAL) Enter the name of the peer group to disable orenable all routers within the peer group..Defaults DisabledCommand Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.8(0.0) Introduced on the S3048–ON and S4048–ON.9.7(0.0) Added support for VRF.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Introduced on the S-Series.7.7.1.0 Introduced on the C-Series.7.2.1.0 Introduced.Usage Information This command turns on BGP soft-reconfiguration inbound debugging. If no neighbor isspecified, debug turns on for all neighbors.debug ip bgp updatesView information about BGP updates.C9000 SeriesSyntax debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X | peer-grouppeer-group-name] updates [in | out | prefix-list prefix-list-name]To disable debugging, use the no debug ip bgp [vrf vrf-name] [A.B.C.D |X:X:X:X::X | peer-group peer-group-name] updates [in | out |prefix-list prefix-list-name] command.Border Gateway Protocol 455
