• show util-threshold memory – Display the configured values of memoryutilization thresholds.util-threshold memoryConfigure the high or low memory utilization thresholds for SNMP traps.C9000 SeriesSyntax util—threshold memory {all | cp | lp slot–id | pe | rp [high{0-100} | low {0-100}]}Parameters all Enter the keyword all to configure the memory utilizationthreshold on all switch CPUs: Control Processor, RouteProcessor, line cards, and port extenders (PE).cp Enter the keyword cp to configure the memory utilizationthreshold for the Control Processor CPU.lp slot-id Enter the keyword lp and the linecard processor (lp) slot-id forwhich you want to configure the CPU utilization time. The rangefor lp slot-id is from 0 to 11.pe Enter the keywordpe to configure the CPU utilization time forport extenders (PE) configured in the system.NOTE: The pe option is only available when theextended bridge feature is enabled.rp Enter the keyword rp to configure the memory utilizationthreshold for the Route Processor CPU.{{high | low} cpu-utilization-threshold-percentage}Enter a percentage value to configure the high or low thresholdlevel for the percentage of memory a switch CPU can use. Thepercentage of memory utilization ranges from 0 to 100.NOTE: A threshold level of 0 disables Syslog and SNMPtraps.Default • High threshold: 92%• Low threshold: 82%Command Mode CONFIGURATIONCONFIGURATION TERMINAL BATCHControl and Monitoring 196
