Command History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series.7.4.1.0 Introduced on the E-Series.RelatedCommandsprotocol lldp (Configuration) — enables LLDP globally.show lldp neighbors — displays the LLDP neighbors.multiplierSet the number of consecutive misses before LLDP declares the interface dead.C9000 SeriesSyntax multiplier integerTo return to the default, use the no multiplier integer command.Parameters integer Enter the number of consecutive misses before the LLDPdeclares the interface dead. The range is from 2 to 10.Defaults 4 x helloCommand Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)Command History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Link Layer Discovery Protocol (LLDP) 1371
