IP Community List CommandsUse the following commands to configure IP community lists on the switch.ip community-listEnter COMMUNITY-LIST mode and create an IP community-list for BGP.C9000 SeriesSyntax ip community-list comm-list-nameTo delete a community-list, use the no ip community-list comm-list-namecommand.Parameters comm-list-name Enter a text string as the name of the community-list, up to 140characters.Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series ExaScale.7.8.1.0 Increased the name string to accept up to 140 characters. Priorto 7.8.1.0, names are up to 16 characters long.6.1.1.0 Introduced on the E-Series.Example Dell(conf)#ip community-list TestComListDell(config-community-list)#Access Control Lists (ACL) 392
