debug fip snooping rxEnable debugging for FIP snooping receive-specific packets.C9000 SeriesSyntax debug fip-snooping rx packet-type [all | discovery | virtual-link-instantiation | virtual-link-maintenance| vlan-discovery][interface]Parameters packet-type Enter the keyword packet-type and then the option type onwhich to enable debugging. The options are:• all — Enter the keyword all to enable debugging on allthe options.• discovery — Enter the keyword discovery to enabledebugging on FCF advertisements and ENode solicitation.• virtual-link-instantiation — Enter the keywordsvirtual-link-instantiation to enable debugging onFLOGI, FDISC, and FLOGO packets.• virtual-link-maintenance — Enter the keywordsvirtual-link-maintenance to enable debugging onFIP clear virtual link frames and keepalives.• vlan-discovery — Enter the keywords vlan-discovery to enable debugging on VLAN requests andnotifications.interface Enter the following keywords and slot/port or numberinformation:• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.Command Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Reference Guide.The following is a list of the Dell Networking OS version history for this command.FCoE Transit 855
