layer2_priority Enter the Layer 2 priority (C-Series and E-Series only). The rangeis from 0 to 7.DSCP_value Enter the DSCP value (C-Series and E-Series only). The range isfrom 0 to 63.priority-taggednumberEnter the keywords priority-tagged then the Layer 2 priority.The range is from 0 to 7.Defaults unconfigured.Command Modes CONFIGURATION (conf-lldp)Command History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series and E-Series.RelatedCommandsdebug lldp interface — debugs LLDP.show lldp neighbors — displays the LLDP neighbors.show running-config lldp — displays the LLDP running configuration.advertise med streaming-videoTo advertise streaming video services for broadcast or multicast-based video, configure the system. Thiscommand does not include video applications that rely on TCP buffering.C9000 SeriesSyntax advertise med streaming-video {vlan-id layer2_priority DSCP_value}| {priority-tagged number}To return to the default, use the no advertise med streaming-video {vlan-idlayer2_priority DSCP_value} | {priority-tagged number} command.Link Layer Discovery Protocol (LLDP) 1386
