Version Description9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100series.9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,S5000, S6000, S6000–ON, Z9500, MXL.Usage Information You are guided through a series of queries to configure SupportAssist. The generatedcommands are added to the running configuration, including the DNS resolvecommands, if configured.This command starts the configuration wizard for the SupportAssist. At any time, youcan exit by entering Ctrl-C. If necessary, you can skip some data entry.support-assist activityTrigger an activity event immediately.Syntax support-assist activity {full-transfer} start nowParameters full-transfer Enter the keywords full-transfer to specify transfer ofconfiguration, inventory, logs, and other information.Command Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100series.9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,S5000, S6000, S6000–ON, Z9500, MXL.SupportAssist CommandsDell Networking OS supports the following SupportAssist mode commands.SupportAssist 2137
