statistics=NULLEID 0x00000bff: gid=0x5,slice=6, slice_idx=0x1, part =0 prio=0xbff, flags=0x10202,Installed, Enabledtcam: color_indep=0,StageInPortDATA=0x0000000000000000000000000000000000000000000000001000000000MASK=0x00000000000000000000000000000000000000000000fdffffffffffffInPortsDATA=0x0000000000000000000000000000000000000000000000001000000000MASK=0x00000000000000000000000000000000000000000000fdffffffffffffHiGigOffset: 320 Width: 1DATA=0x00000000MASK=0x00000001SrcMacOffset: 89 Width: 48DATA=0x00000000 08000100MASK=0x0000ffff ffffffffaction={act=DropCancel, param0=0(0), param1=0(0), param2=0(0),param3=0(0)}policer=statistics=NULLshow hardware system-flowThis command displays hardware system-flow information.C9000 SeriesSyntax show hardware system-flow {cp-switch | linecard slot-id port-setport number | pe pe-id stack-unit unit–number port-set port-pipe-id } countersParameters cp-switch Enter the keyword cp-switch to display the counters forcontrol traffic on the control plane.linecard slot-id Enter the linecard slot-id parameters to identify the linecard on which you want to clear system-flow statistics. Therange of slot IDs is from 0 to 11.pe peid Enter the keyword pe and the port extender (PE) ID to display thecounters for a specified PE. The PE ID ranges is from 0 to 255.NOTE: The pe option is only visible when the extendedbridge feature is enabled.stack-unit unit-numberEnter the keyword stack-unit and unit number to display thecounters for the specified stack-unit. The stack unit range is from0 to 7.Debugging and Diagnostics 795
