Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 1/3 dst:224.0.0.5netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0default-information originateTo generate a default external route into an OSPF routing domain, configure the system.C9000 SeriesSyntax default-information originate [always] [metric metric-value][metric-type type-value] [route-map map-name]To return to the default values, use the no default-information originatecommand.Parameters always (OPTIONAL) Enter the keyword always to specify that defaultroute information must always be advertised.metric metric-value(OPTIONAL) Enter the keyword metric then a number toconfigure a metric value for the route. The range is from 1 to16777214.metric-type type-value(OPTIONAL) Enter the keywords metric-type then an OSPFlink state type of 1 or 2 for default routes. The values are:• 1 = Type 1 external route• 2 = Type 2 external routeroute-map map-name(OPTIONAL) Enter the keywords route-map then the name ofan established route map.Defaults Disabled.Command Modes ROUTER OSPFCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.Open Shortest Path First (OSPFv2 and OSPFv3) 1492
