clear ip ospf statisticsClear the packet statistics in interfaces and neighbors.C9000 SeriesSyntax clear ip ospf process-id vrf vrf-name statistics [interface name{neighbor router-id}]Parameters process-id Enter the OSPF Process ID to clear a specific process. If noProcess ID is entered, all OSPF processes are cleared.vrf vrf-name Enter the keyword vrf and the name of the VRF to clear allOSPF routing tables corresponding to that VRFinterface name (OPTIONAL) Enter the keyword interface then one of thefollowing interface keywords and slot/port or numberinformation:• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet then the slot/port information.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a Loopback interface, enter the keyword loopbackthen a number from 0 to 16383.• For a Null interface, enter the keywords null 0.• For Port Channel groups, enter the keywords port-channel then a number. The range is from 1 to 128.• For a tunnel interface, enter the keyword tunnel then thetunnel ID. The range is from 1 to 16383.• For a VLAN, enter the keyword vlan then a number from 1to 4094.neighbor router-id(OPTIONAL) Enter the keyword neighbor then the neighbor’srouter-id in dotted decimal format (A.B.C.D.).Defaults noneCommand Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Open Shortest Path First (OSPFv2 and OSPFv3) 1488
