Example Dell(conf-if-te-5/0)#do clear countersClear counters on all interfaces [confirm]Dell(conf-if-te-5/0)#Dell(conf-if-te-5/0)#do clear loggingClear logging buffer [confirm]Dell(conf-if-te-5/0)#Dell(conf-if-te-5/0)#do reloadSystem configuration has been modified. Save? [yes/no]: nProceed with reload [confirm yes/no]: nDell(conf-if-te-5/0)#enableEnter EXEC Privilege mode or any other privilege level configured. After entering this command, you mayneed to enter a password.C9000 SeriesSyntax enable [level]From a PE console, use enable [level] to enter EXEC privilege mode .Parameters level (OPTIONAL) Enter a number for a privilege level of DellNetworking OS. The range is from 0 to 15.Defaults 15Command Modes EXECCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010 and C1048P.9.5(0.1) Added support for roles on the Z9500.9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810,MXL9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.12.0 Introduced on the S4810.Control and Monitoring 85
