Version Description9.7(0.0) Introduced on the S6000-ON.9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000switches.hop-limitEnable the verification of the advertised hop count limit. If this command is not configured, the verificationprocess is bypassed.C9000 SeriesSyntax hop-limit {maximum | minimum limit}To reset the hop count limit, use the no hop-limit {maximum | minimum limit}command.Parameters maximum limit Enter the keyword maximum then the hop limit value. The rangeis from 0 to 254.minimum limit Enter the keyword minimum then the hop limit value. The rangeis from 0 to 254.Defaults noneCommand Modes CONFIGURATIONCONFIGURATION TERMINAL BATCHCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.9.9(0.0) Introduced on the C9010.9.8(0.0) Introduced on the S3048-ON and S4048-ON.9.7(0.0) Introduced on the S6000-ON.Neighbor Discovery Protocol (NDP) 1443
