Example Dell#connect pe 254Login: peadminPassword:DellPE>feature extended-bridgeEnable 802.1BR (bridge port extender) support on the switch.C9000 SeriesSyntax [no] feature extended-bridgeTo disable 802.1BR support on the switch, use the no feature extended-bridgecommand.Default NoneCommand Modes CONFIGURATIONCONFIGURATION TERMINAL BATCHCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.9.9(0.0) Introduced on the C9010.Usage Information This command enables support for the 802.1 bridge PE (BR) on the switch. Enabling thePE feature allows you to provision the PE. The no feature extended-bridgecommand disables bridge PE support and deprovisions a PE. When you use thiscommand in the Configuration Terminal Batch mode, you can enable the support forthe bridge PE connected in a Dual-Homing setup.You can use the show feature command to check whether the extended-bridgefeature has been enabled as shown in the following example.ExampleDell>show featureFeature State------- -----Port Extenders (PE) 1716
