Version Description8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series ExaScale.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.Usage Information You can only configure one domain name with the ip domain-name command. Toconfigure more than one domain name, configure the ip domain-list command upto six times.To enable dynamic resolution of hosts, use the following steps:• specify a domain name server with the ip name-server command• enable DNS with the ip domain-lookup commandTo view current bindings, use the show hosts command.RelatedCommandsip domain-list — configures additional names.ip helper-address hop-count disableDisable the hop-count increment for the DHCP relay agent.C9000 SeriesSyntax ip helper-address hop-count disableTo re-enable the hop-count increment, use the no ip helper-address hop-count disable command.Defaults Enabled; the hops field in the DHCP message header is incremental by default.Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.IPv4 Routing 1192
