clear hardwareClear statistics from a specified hardware component.C9000 SeriesSyntax clear hardware {cp {cpu {data-plane | i2c statistics | sata-interface}} | cp-switch {counters} | linecard slot-id {counters |cpu {data-plane | i2c | sata-interface} statistics} | hg-stats|unit unit-num {counters} | party-bus {counters} | pe pe-id stack-unit unit-number {counters | cpu | stack—port | unit} | rp {cpu{data-plane | i2c | sata-interface} statistics} | sfm sfm-unit-num{counters}}Parameters cp Enter the keywords cp with a command option to clear thehardware statistics for the Control Processor. The commandoptions are:• cpu data-plane statistics: Clears data-planestatistics, including the high-Gigabit Ethernet (HiGig) portstatistics with input/output counters to which the stackingmodule is connected.• cpu i2c statistics: Clears active i2c-addressstatistics.• cpu sata-interface statistics: Clears sata-interface error counter statistics.cp-switch Enter the keyword cp-switch with a command option to clearthe hardware statistics for control-plane and protocol controltraffic. The command options are:• counters: Clears the counters for control-plane andprotocol control packets to troubleshoot an errorcondition.linecard slot-id Enter the linecard slot-id parameters with a commandoption to clear the hardware statistics for a specified switch linecard. The range of slot IDs is from 0 to 11. The commandoptions are:• counters: Clears traffic counters on line-card ports.• cpu data-plane statistics: Clears data-planestatistics, including the HiGig port statistics with input/output counters to which the stacking module isconnected.• cpu i2c statistics : Clears active i2c-addressstatistics.Debugging and Diagnostics 765
