MAC address table, enter 0. The range is from 10 to 1000000.The default is 1800 seconds.Defaults 1800 secondsCommand Modes CONFIGURATIONCONFIGURATION TERMINAL BATCHCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.3.1.0 On the E-Series, available in INTERFACE VLAN context, reducedthe minimum aging time in the INTERFACE VLAN context from10 seconds to 1 second.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.6.2.1.1 Introduced on the E-Series.RelatedCommandsmac learning-limit — sets the MAC address learning limits for a selected interface.show mac-address-table aging-time — displays the MAC aging time.mac-address-table disable-learningDisable MAC address learning from LACP or LLDP BPDUs.Syntax mac-address-table disable-learning [lacp | lldp]Parameters lacp Enter lacp to disable MAC address learning from LACP BPDUs.lldp Enter LLDP to disable MAC address learning from LLDP BPDUs.Layer 2 1310
