Layer 2OverheadDifference between Link MTU and IP MTUTagged Packetwith VLAN-StackHeader26 bytesRelatedCommandsmtu — sets the link MTU for an Ethernet interface.ip name-serverEnter up to six IPv4 addresses of name servers. The order you enter the addresses determines the order oftheir use.C9000 SeriesSyntax ip name-server ipv4-address [ipv4-address2...ipv4-address6]To remove a name server, use the no ip name-server ip-address command.Parameters ipv4-address Enter the IPv4 address, in dotted decimal format, of the nameserver to be used.ipv4-address2...ipv4-address6(OPTIONAL) Enter up five more IPv4 addresses, in dotteddecimal format, of name servers to be used. Separate theaddresses with a space.Defaults No name servers are configured.Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.IPv4 Routing 1197
