Usage Information To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-id1).The Default VLAN contains only untagged interfaces.Use this command in Configuration Terminal Batch mode to specify a default VLAN in adual-homing setup.RelatedCommandsinterface vlan — configures a VLAN.default-vlan disableDisable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configuredas a member of another VLAN.C9000 SeriesDefaults EnabledCommand Modes CONFIGURATIONCONFIGURATION TERMINAL BATCHCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.3.1.0 IntroducedUsage Information The no default vlan disable command is not listed in the running-configuration,but when the default VLAN is disabled, default-vlan disable is listed in therunning-configuration. Use this command in Configuration Terminal Batch mode todisable the default VLAN in a dual-homing setup.Layer 2 1329
