show control-traffic queueDisplay per-queue counters of rate-limited control-plane traffic.C9000 SeriesSyntax show contol—traffic queue {all | queue-id queue-number} countersParameters all Enter the keyword all to display counters for rate-limited trafficon all CPU queues, including Route Processor, ControlProcessor, and line-card CPUs.queue-id queue-numberEnter the queue number to display counters for rate-limitedtraffic on a specified CPU queue. For the C9000 Series, therange of queue-number values is from 0 to 20. The twenty-onecontrol–plane queues are divided into groups of seven queuesfor the Route Processor, Control Processor, and line-card CPUsas follows:C9000 Series• Queues 0 to 6 process packets destined to the ControlProcessor CPU .• Queues 7 to 13 process packets destined to the RouteProcessor CPU.• Queues 14 to 20 process packets destined to the line cardCPU.Defaults NoneCommand Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.8.0 Introduced on the S4810.Control Plane Policing (CoPP) 669
