Version Description9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000switches.ipv6 neighborConfigure a static entry in the IPv6 neighbor discovery.C9000 SeriesSyntax ipv6 neighbor{ipv6-address} {interface interface}{hardware_address}[vrf vrf-name]To remove a static IPv6 entry from the IPv6 neighbor discovery, use the no ipv6neighboripv6–address{interface interfaceParameters ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format.NOTE: The :: notation specifies successive hexadecimalfields of zero.interfaceintehardware_rfaceEnter the keyword interface then the interface type and slot/port or number information:• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet then the slot/port information.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port/subportinformation.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a Loopback interface, enter the keyword loopbackthen a number from 0 to 16383.• For a port channel interface, enter the keywords port-channel then a number.• For a Null interface, enter the keyword null then the Nullinterface number.• For a VLAN interface, enter the keyword vlan then anumber from 1 to 4094.• For a tunnel interface, enter the keyword tunnel then thetunnel interface number. The range is from 1 to 16383.• For a port extender Gigabit Ethernet interface, enter thekeyword peGigE then the pe-id / stack-unit / port-idinformation. The pe-id range is from 0 to 255; the stack-Neighbor Discovery Protocol (NDP) 1444
