Executing IEEE compatible Spanning Tree ProtocolRoot ID Priority 32773, Address 0001.e832.73f7Root Bridge hello time 2, max age 20, forward delay 15Bridge ID Priority 32773 (priority 32768 sys-id-ext 5), Address0001.e832.73f7We are the root of Vlan 5Configured hello time 2, max age 20, forward delay 15Interface DesignatedName PortID Prio Cost Sts Cost Bridge ID PortID-------------------------------------------------------------Te 0/10 128.140 128 200000 FWD 0 32773 0001.e832.73f7 128.140Te 0/12 128.142 128 200000 DIS 0 32773 0001.e832.73f7 128.142InterfaceName Role PortID Prio Cost Sts Cost Link-type Edge--------------------------------------------------------Te 0/10 Desg 128.140 128 200000 FWD 0 P2P NoTe 0/12 Dis 128.142 128 200000 DIS 0 P2P NoRelatedCommandsprotocol spanning-tree pvst – enter SPANNING TREE mode on the switch.protocol spanning-tree pvstTo enable PVST+ on a device, enter the PVST+ mode.C9000 SeriesSyntax protocol spanning-tree pvstTo disable PVST+, use the disable command.Defaults noneCommand Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.Per-VLAN Spanning Tree Plus (PVST+) 1642
