Usage Information By default, no interfaces are passive. Routing updates are sent to all interfaces on whichthe routing protocol is enabled.If you disable the sending of routing updates on an interface, the particular addressprefix continues to be advertised to other interfaces, and updates from other routers onthat interface continue to be received and processed.OSPFv3 for IPv6 routing information is not sent or received through the specified routerinterface. The specified interface address appears as a stub network in the OSPFv3 forIPv6 domain.redistributeRedistribute into OSPFv3.C9000 SeriesSyntax redistribute {bgp as number}{connected | static}[metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value]To disable redistribution, use the no redistribute {connected | static}command.Parameters bgp as number Enter the keyword bgp then the autonomous system number.The range is from 1 to 65535.connected Enter the keyword connected to redistribute routes fromphysically connected interfaces.static Enter the keyword static to redistribute manually configuredroutes.metric metric-valueEnter the keyword metric then the metric value.The range is from 0 to 16777214.The default is 20.metric-type type-value(OPTIONAL) Enter the keywords metric-type then the OSPFv3link state type of 1 or 2 for default routes. The values are:• 1 for a type 1 external routeOpen Shortest Path First (OSPFv2 and OSPFv3) 1595
