The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.7(0.0) Introduced on the S6000-ON.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.2.1.0 Introduced on S-Series Stacking.8.1.1.0 Introduced on the E-Series ExaScale.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series.6.2.1.1 Introduced on the E-Series.Usage Information This command changes the sampling rate for an interface. By default, the sampling rateof an interface is set to the same value as the current global default sampling rate ifport is operationally down, otherwise sampling rate changes based on port line speed.If the value entered is not a correct power of 2, the command generates an errormessage with the previous and next power-of-2 value. Select one of these two numberand re-enter the command.RelatedCommandssflow sample-rate (Global) — changes the sampling rate globally.show sflowDisplay the current sFlow configuration.Syntax show sflow [interface]Parameters interface (OPTIONAL) Enter the following keywords and slot/port ornumber information:• For a 1-Gigabit Ethernet interface, enter the keywordGigabitEthernet then the slot/port information.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a Loopback interface, enter the keyword loopbackthen a number from 0 to 16383.sFlow 2037
