xor2 Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-BISYNC and lower 8 bits of xor2.xor4 Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-BISYNC and lower 8 bits of xor4.xor8 Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and lower 8 bits of xor8.xor16 Use CR16 — 16-bit XOR.crc16cc Use CRC16_CCITT — 16-bit CRC16 using CRC16-CCITTpolynomial.crc32MSB Use CRC32_UPPER — MSB 16 bits of computed CRC32.crc32LSB Use CRC32_LOWER — LSB 16 bits of computed CRC32.linecard slot-idport-set port-pipeEnter the linecard slot ID and port-pipe number for the set ofports for which you want to redistribute traffic flows. The rangeof slot IDs is 0 to 11. The range of port-pipe numbers is 0.Defaults crc16 algorithmCommand Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.11.4 Introduced on the Z9000.hash-algorithm hg-seedSelect the seed value used in HiGig hashing.C9000 SeriesSyntax [no] hash-algorithm hg-seed number [linecard slot-id port-setport-pipe]Equal Cost Multi-Path (ECMP) 843
