Example Dell(conf-if-po-1)# show config!interface Port-channel 1no ip addressshutdownDell(conf-if-po-1)#show interfaces port-channelDisplay information on configured Port Channel groups.C9000 SeriesSyntax show interfaces port-channel [channel-number] [brief]Parameters channel-number For a Port Channel interface, enter the keyword port-channelthen a number. The range is from 1 to 128.brief (OPTIONAL) Enter the keyword brief to display only the portchannel number, the state of the port channel, and the numberof interfaces in the port channel.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series ExaScale.7.6.1.0 Introduced on the S-Series. Modified to display the LAG failovergroup status.7.5.1.0 Introduced on the C-Series.Interfaces 1025
