Use this command in Interface Batch Mode to enable port control on an interface in adual-homing setup.dot1x profileConfigure a dot1x profile to define a list of trusted supplicant MAC addresses.Syntax [no] dot1x profile profile-nameParameters profile-name Enter a dot1x profile-name. The profile name length is limitedto 32 characters.Defaults NoneCommand Modes CONFIGURATIONCONFIGURATION TERMINAL BATCHError Strings NONECommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810,S4820T, S5000, S6000, S6000–ON, the Configuration TerminalBatch mode on C9010, Z9100–ON, and Z9500.9.9(0.0) Introduced on the C9010.Usage Information The dot1x profile command configures a dot1x profile to define a list of trustedsupplicant MAC addresses. Maximum number of dot1x profiles is limited to 10. Thiscommand launches dot1x profile mode for entering profile related commands such asthe mac command. The dot1x static-mab command assigns the dot1x profile to aninterface.Use this command in Configuration Terminal Batch mode to configure the dot1xprofile in a dual-homing setup.RelatedCommands • dot1x static-mab• mac802.1X 253
