interface interface Enter the following keywords and slot/port or numberinformation:• For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.vlan vlan-id Enter the keyword vlan then a VLAN ID number from 1 to 4094.Command Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.12.0 Added support for sticky MAC addresses.8.3.11.1 Introduced on the Z9000.8.5.1.0 Added support for 4-port 40G line cards on ExaScale.8.3.7.0 Introduced on the S4810.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.6.1.1.1 Introduced on the E-Series.mac-address-table aging-timeSpecify an aging time for MAC addresses to remove from the MAC address table.C9000 SeriesSyntax mac-address-table aging-time secondsParameters seconds Enter either zero (0) or a number as the number of secondsbefore MAC addresses are relearned. To disable aging of theLayer 2 1309
