CONFIGURATION TERMINAL BATCHCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.3.1.0 Introduced.Usage Information By default, when rate policing and shaping, the system does not include the Preamble,SFD, or the IFG fields. These fields are overhead; only the fields from MAC destinationaddress to the CRC are used for forwarding and are included in these rate meteringcalculations.Use this command in Configuration Terminal Batch mode to enable the QoS rateadjustment in a dual-homing setup.service-class bandwidth-percentageSpecify a minimum bandwidth for queues.C9000 SeriesSyntax service-class bandwidth-percentage queue0 percentage queue1percentage queue2 percentage queue3 percentagequeue4 percentagequeue5 percentage queue6 percentageParameters percentage Enter the bandwidth-weight as a percentage. The range is from1 to 100.Defaults noneCommand Modes CONFIGURATIONCONFIGURATION TERMINAL BATCHQuality of Service (QoS) 1786
