The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.6(0.0) Removed from the S-series. Replaced by the dcb-mapcommands.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.12.0 Introduced on the S4810.8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.pfc no-drop queuesConfigure the port queues that still function as no-drop queues for lossless traffic.C9000 SeriesSyntax pfc no-drop queues queue-rangeTo remove the no-drop port queues, use the no pfc no-drop queues command.Parameters queue-range Enter the queue range. Separate the queue values with acomma; specify a priority range with a dash; for example, pfcno-drop queues 1,3 or pfc no-drop queues 7 or pfcno-drop queues 0,7. The range is from 0 to 3.queue-range Enter the queue range. Separate the queue values with acomma; specify a priority range with a dash; for example, pfcno-drop queues 1,3 or pfc no-drop queues 2-3. Therange is from 0 to 4.Defaults No lossless queues are configured.Command Modes INTERFACECommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.7(0.1) Introduced on the S3048-ON and S4048-ON.Data Center Bridging (DCB) 686
