Field DescriptionDevice Type Displays whether the device is Type 1 or Type 2.PoE Port Priority Displays the power configured for the port (default is low). Seepower inline priority.LLDP Support Displays the power requested is via LLDP-MED extended power-via-mdi TLV or IEEE 802.3at power-via-mdi TLV.ExampleDell#show power inline pe 255 stack-unit 0Global inline power Threshold : 99Power Reserved for inline Power: 1612WTotal Inline Power Consumed: 21WRemaining inline power Available: 1580WPower Management Mode: ClassInterface Inline Power Inline Power Class DevicePoE Port LLDPMax / Alloc Consumed TypePriority Support(Watts) (Watts)------------- ------------ ------------ ------- -------------- ------PeGi 255/0/0 30.00/21.40 21.50 4 2low 0show power detailDisplay the inline power consumption details for a port extender.C9000 SeriesSyntax show power detail {pe pe-id stack-unit unit number}Parameters pe Enter the keywordpe and the port externder ID. Range is 0–255.stack-unit Enter the stack-unit keyword and the unit ID. Range is 0–7.Defaults NoneCommand Modes EXECCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Port Extenders (PE) 1760
