Command Modes VRRPCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.6.2.1.1 Introduced on the E-Series.Example Dell(conf-if-vrid-4)#show convrrp-group 4virtual-address 119.192.182.124!show vrrpView the VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns NoActive VRRP group.C9000 SeriesSyntax show vrrp [vrrp-id] [interface | brief | ipv6 | vrf vrf-name]Parameters vrrp-id (OPTIONAL) Enter the Virtual Router Identifier for the VRRP group toview only that group. The range is from 1 to 255.interface OPTIONAL) Enter the following keywords and slot/port or numberinformation:• For Port Channel interface types, enter the keywords port-channel then the number. The range is from 1 to 128.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.Virtual Router Redundancy Protocol (VRRP) 2245
