show cam-acl-vlanDisplay the number of FP blocks of CAM that are allocated for different ACL VLAN services, including ACLVLAN optimization, VLAN iSCSI counters, and Open Flow.C9000 SeriesSyntax show cam-acl-vlanCommand Modes EXEC PrivilegeCommand History Version Description9.9(0.0) Introduced on the C9010.9.5(0.0) Introduced on the Z9500.9.3(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.Usage Information After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot theswitch to enable ACL VLAN optimization.The following table describes the output fields of the show cam-acl-vlan command:Table 1. show cam-acl-vlan Command DescriptionField DescriptionChassis Vlan Cam ACL Details about the CAM blocks allocatedfor ACLs for various VLAN operations at asystem-wide, global level.Stack Unit Details about the CAM blocks allocatedfor ACLs for various VLAN operations fora particular stack unit.Current Settings(in block sizes) Information about the number of FPblocks that are currently in use orallocated.VlanOpenFlow Number of FP blocks for VLAN open flowoperations.VlanIscsi Number of FP blocks for VLAN internetsmall computer system interface (iSCSI)counters.VlanHp Number of FP blocks for VLAN highperformance processes.VlanFcoe Number of FP blocks for VLAN FiberChannel over Ethernet (FCoE) operations.Access Control Lists (ACL) 326
