ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for thataddress family.unicast (OPTIONAL) Enter the keyword unicast to select the unicastoption within the selected address family.multicast (OPTIONAL) Enter the keyword multicast to select themulticast option within the selected address family. Multicast issupported on IPv4 only.soft (OPTIONAL) Enter the keyword soft to configure and activatepolicies without resetting the BGP TCP session, that is, BGP SoftReconfiguration.in (OPTIONAL) Enter the keyword in to activate only inboundpolicies.out (OPTIONAL) Enter the keyword out to activate only outboundpolicies.Command Modes EXEC PrivilegeCommand History Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.2.1.0 Introduced on the E-Series ExaScale.7.4.1.0 Introducedclear ip bgp ipv6 dampeningClear information on route dampening and return suppressed route to active state.C9000 SeriesSyntax clear ip bgp ipv6 unicast dampening [ipv6-address]Parameters ipv6-address Enter the IPv6 address in the x:x:x:x::x format followed by theprefix length in the /x format. The range is /0 to /128.NOTE: The :: notation specifies successive hexadecimalfields of zeros.Command Modes EXEC PrivilegeCommand History Version Description9.9(0.0) Introduced on the C9010.Border Gateway Protocol 583
