Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.8(0.0) Introduced on the S3048-ON and S4048-ON.9.7(0.0) Added support for VRF. Introduced on the S6000-ON.9.5(0.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series ExaScale.6.1.1.0 Added support for the VLAN interface.ip pim dr-priorityChange the designated router (DR) priority for the interface.C9000 SeriesSyntax ip pim dr-priority priority-valueTo remove the DR priority value assigned, use the no ip pim dr-prioritycommand.Parameters priority-value Enter a number. Preference is given to larger/higher number.The range is from 0 to 4294967294. The default is 1.Defaults 1Command Modes INTERFACEINTERFACE (BATCH Mode)Command History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.PIM-Sparse Mode (PIM-SM) 1675
