Version Description9.0.0.0 Introduced on the Z9000.8.3.19.0 Introduced on the S4820T.8.3.12.0 Introduced on the S4810.Example Dell(conf-vlt-domain)#do clear vlt statisticsSure want to Clear VLT Statistics [confirm] yesDell(conf-vlt-domain)#RelatedCommandsshow vlt statistics — displays statistics on VLT operations.delay-restoreConfigure the delay in bringing up VLT ports after reload or peer-link restoration between the VLT peerswitches.C9000 SeriesSyntax delay-restoreParameters delay-restore Enter the amount of time, in seconds, to delay bringing up theVLT ports after the VLT device is reloaded or after the peer-linkis restored between VLT peer switches. The range from 1 to1200. The default is 90 seconds.Defaults Not configured.Command Modes VLT DOMAINCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.5(0.1) Introduced on the Z9500.9.2(0.0) Introduced on the M I/O Aggregator. This command issupported in Programmable-Mux (PMUX) mode only.9.0.2.0 Introduced on the S6000.Virtual Link Trunking (VLT) 2207
