Examples The following sample output shows the line-by-line style display when using the showrunning-config acl-vlan-group option. Note that no group or access list namesare truncated.Dell#show running-config acl-vlan-group!acl-vlan-group group1description Acl Vlan Group1member vlan 1-10,400-410,500ip access-group acl1 out implicit-permit!acl-vlan-group group2member vlan 20ip access-group acl2 outDell#Dell#show running-config acl-vlan-group group1!acl-vlan-group group1description Acl Vlan Group1member vlan 1-10,400-410,500ip access-group acl1 out implicit-permitCommon MAC ACL CommandsThe following commands are available within both MAC ACL modes (Standard and Extended) and do nothave mode-specific options. These commands allow you to clear, display, and assign MAC ACLconfigurations.The C9000 supports both Ingress and Egress MAC ACLs.You can apply a MAC ACL on physical, port-channel and VLAN interfaces. The permit/deny statements in theACL determine how traffic on an interface, VLAN members, or port-channel members is handled.clear counters mac access-groupClear counters for all or a specific MAC ACL.C9000 SeriesSyntax clear counters mac access-group [mac-list-name]Parameters mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.Command Modes EXEC PrivilegeAccess Control Lists (ACL) 328
