!Dell(conf)#snmp-server community guest ro snmp-ro-aclDell(conf)#RelatedCommandsip access-list standard — names (or selects) a standard access list to filter based on IPaddress.ipv6 access-list — configures an access list based on IPv6 addresses or protocols.show running-config — displays the current SNMP configuration and defaults.snmp-server enable trapsEnable SNMP traps.C9000 SeriesSyntax snmp-server enable traps [notification-type] [notification-option]To disable traps, use the no snmp-server enable traps [notification-type][notification-option] command.Parameters notification-type Enter the type of notification from the following list:• bgp — Enable notification of changes in the BGP process.• config — Enable notification of changes to startup orrunning configuration.• dot1br— Enable notification of changes to DOT1BR.• ecfm — Enable notification of changes to ECFM.• ecmp — Enable notification of traffic imbalance in ECMP ora link bundle.• entity —Enable notification of Entity ManagementInformation Base (MIB) changes.• envmon — Enable notification when an environmentalthreshold is exceeded.• ets — Enable notification of ETS changes.• fips — Enable notification of a FIP Snooping statechanges.• hg-lbm — Enable notification of hiGig link-bundle statechanges.• isis — Enable notification of IS-IS adjacency statechanges.• pfc — Enable notification of changes to PFC.• lacp — Enable notification of LACP state changes.• snmp — Enable SNMP notifications defined in RFC 1157.Simple Network Management Protocol (SNMP) and Syslog 2051
