Command Modes • CONFIGURATION• CONFIGURATION ECMP-GROUPCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.9.0.0.0 Introduced on the Z9000.8.3.19.0 Introduced on the S4820T.8.3.10.0 Introduced on the S4810.Usage Information Using CONFIGURATION mode, create an ECMP group ID. You can then assigninterfaces to the ECMP group using CONFIGURATION ECMP-GROUP mode. You canalso enable on the 10–Gigabit Ethernet, 40–Gigabit Ethernet, and port-channelconfiguration using the CONFIGURATION ECMP-GROUP command mode.hash-algorithm ecmpChanges the hash algorithm used to distribute traffic flows across an ECMP.C9000 SeriesSyntax hash-algorithm {ecmp {crc16 | crc16cc | crc32MSB | crc32LSB | crc–upper | dest-ip | lsb | xor1 | xor2 | xor4 | xor8 | xor16} hg{crc16 | crc16cc | crc32MSB | crc32LSB | xor1 | xor2 | xor4 | xor8| xor16} {hg-seed seed-value} lag {crc16 | crc16cc | crc32MSB |crc32LSB | xor1 | xor2 | xor4 | xor8 | xor16} | seed seed-value}linecard slot-id | port-set port-pipeTo return to the default hash algorithm, use the no hash-algorithm command.To return to the default ECMP hash algorithm, use the no hash-algorithm ecmpalgorithm-value command.To remove the hash algorithm on a particular line card, use the no hash-algorithmlinecard number command.Equal Cost Multi-Path (ECMP) 839
