Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series.6.2.1.1 Introduced on the E-Series.Usage Information This command is intended for low-speed interfaces.passive-interfaceSuppress routing updates on a specified interface.C9000 SeriesSyntax passive-interface interfaceTo delete a passive interface, use the no passive-interface interfacecommand.Parameters interface Enter the following information:• For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 4096.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a VLAN, enter the keyword vlan then a number from 1to 4094.Defaults Not configured.Command Modes ROUTER RIPCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.Routing Information Protocol (RIP) 1901
