track interface ip routingConfigure object tracking on the routing status of an IPv4 Layer 3 interface.C9000 SeriesSyntax track object-id interface interface ip routingTo return to the default setting, use the no track object-id command.Parameters object-id Enter the ID number of the tracked object. The range is from 1to 500.interface Enter one of the following values:• For a 1-Gigabit Ethernet interface, entergigabitethernet and the slot-number/ port-number.• For a Loopback interface, enter the keyword loopbackthen a number from 0 to 16383.• For a port channel interface, enter the keywords port-channel then a number.• For a 10-Gigabit Ethernet interface, entertengigabitethernet and the slot-number/ port-number.• For a VLAN interface, enter the keyword vlan then anumber from 1 to 4094.Defaults noneCommand Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.8(0.0) Introduced on the S3048-ON and S4048-ON.9.7(0.0) Introduced on the S6000-ON.8.3.12.0 Introduced on the S4810.8.4.1.0 Introduced.Usage Information Use this command to create an object that tracks the routing state of an IPv4 Layer 3interface:Object Tracking 1466
