Version Description7.5.1.0 Introduced on the C-Series.6.1.1.1 Introduced on the E-Series.Usage Information The following describes the show ip ospf process-id neighbor commandshown in the following example.Item DescriptionNeighbor ID Displays the neighbor router ID.Pri Displays the priority assigned neighbor.State Displays the OSPF state of the neighbor.Dead Time Displays the expected time until the system declares theneighbor dead.Address Displays the IP address of the neighbor.Interface Displays the interface type slot/port information.Area Displays the neighbor’s area (process ID).Example Dell#show ip ospf 34 neighborNeighbor ID Pri State Dead Time Address Interface Area20.20.20.7 1 FULL/DR 00:00:32 182.10.10.3 Te 0/0 0.0.0.2192.10.10.2 1 FULL/DR 00:00:37 192.10.10.2 Te 0/1 0.0.0.120.20.20.1 1 FULL/DROTHER00:00:36 192.10.10.4 Te 0/1 0.0.0.1Dell#show ip ospf routesDisplay routes OSPF calculates and stores in OSPF RIB.C9000 SeriesSyntax show ip ospf [process-id|vrf vrf-name]routesParameters process-id Enter the OSPF Process ID to show a specific process. If noProcess ID is entered, command applies only to the first OSPFprocess.vrf vrf-name Enter the keyword vrf and the name of the VRF to view theOSPF RIB information corresponding to the OSPF processes thatare tied to a specific VRF.Defaults noneOpen Shortest Path First (OSPFv2 and OSPFv3) 1554
