Parameters VLAN-range Enter the member VLANs using comma-separated VLAN IDs, arange of VLAN IDs, a single VLAN ID, or a combination. Forexample:Comma-separated: 3, 4, 6Range: 5-10Combination: 3, 4, 5-10, 8Default NoneCommand Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)Command History Version Description9.9(0.0) Introduced on the C9010.9.5(0.0) Introduced on the Z9500.9.3(0.0) Introduced on the S4810, S4820T, and Z9000.Usage Information At a maximum, there can be only 32 VLAN members in all ACL VLAN groups. A VLANcan belong to only one ACL VLAN group at a time.You can create an ACL VLAN group and attach the ACL with the VLAN members. Theoptimization is applicable only when you create an ACL VLAN group. If you apply anACL separately on the VLAN interface, each ACL has a mapping with the VLAN andincreased CAM space utilization occurs.Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-VLANmapping storage in CAM prior to the implementation of the ACL VLAN groupfunctionality.show acl-vlan-groupDisplay the configured ACL VLAN groups on the switch.C9000 SeriesSyntax show acl-vlan-group {group-name | detail}Parameters group-name Display the configuration of an ACL VLAN group.detail Display information about all configured ACL VLAN groups in aline-by-line format.Access Control Lists (ACL) 324
