Version Description6.1.1.0 Introduced on the E-Series.radius-server hostConfigure a RADIUS server host.C9000 SeriesSyntax radius-server host {hostname | ipv4-address | ipv6-address} [auth-port port-number] [retransmit retries] [timeout seconds] [key[encryption-type] key]Parameters hostname Enter the name of the RADIUS server host.ipv4-address |ipv6-addressEnter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) ofthe RADIUS server host.auth-port port-number(OPTIONAL) Enter the keywords auth-port then a number asthe port number. The range is from zero (0) to 65535. Thedefault port-number is 1812.retransmit retries (OPTIONAL) Enter the keyword retransmit then a number asthe number of attempts. This parameter overwrites the radius-server retransmit command. The range is from zero (0) to100. The default is 3 attempts.timeout seconds (OPTIONAL) Enter the keyword timeout then the seconds thetime interval the switch waits for a reply from the RADIUS server.This parameter overwrites the radius-server timeoutcommand. The range is from 0 to 1000. The default is 5seconds.key [encryption-type] key(OPTIONAL) Enter the keyword key then an optionalencryption-type and a string up to 42 characters long as theauthentication key. The RADIUS host server uses thisauthentication key and the RADIUS daemon operating on thisswitch.For the encryption-type, enter either zero (0) or 7 as theencryption type for the key entered. The options are:• 0 is the default and means the password is not encryptedand stored as clear text.• 7 means that the password is encrypted and hidden.Security 1954
