• a minus sign (-) then a number from 1 to 23 as the numberof hours.Defaults Not configured.Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, referto the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.9.2(1.0) Introduced on the Z9500.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.6.1.1.0 Introduced on the E-Series.Usage Information Coordinated universal time (UTC) is the time standard based on the InternationalAtomic Time standard, commonly known as Greenwich Mean time. When determiningsystem time, include the differentiator between UTC and your local timezone. Forexample, San Jose, CA is the Pacific Timezone with a UTC offset of -8.debug ntpDisplay network time protocol (NTP) transactions and protocol messages for troubleshooting.C9000 SeriesSyntax debug ntp {adjust | all | authentication | events | loopfilter |packets | select | sync}To disable debugging of NTP transactions, use the no debug ntp {adjust | all |authentication | events | loopfilter | packets | select | sync}command.System Time and Date 2163
