upload trace-logUpload a trace log file from a switch CPU.C9000 SeriesSyntax upload trace-log {cp [cmd-history]| linecard | slot-id | pe pe-id[stack-unit unit number ] |rp } [sw-trace | hw-trace]Parameters rp Enter the keyword rp to upload a trace log from the RouteProcessor.cp Enter the keyword cp to upload a trace log from the ControlProcessor.linecard slot-id Enter the linecard slot-id parameters to specify the line-card CPU whose trace log you want to upload.cmd-history Enter the keyword cmd-history to upload the commandhistory from the specified CPU.hw-trace Enter the keyword hw-trace to upload the hardware trace logfrom the specified CPU.sw-trace Enter the keyword sw-trace to upload the software trace logfrom the specified CPU.pe pe-id Enter the keyword pe and port extender ID. Range is from 0 to255.NOTE: The pe option is only available when theextended bridge feature is enabled.stack unit number Enter the keyword stack unit and a stack unit number. Stackunit range is from 0 to 7.Defaults None.Command Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.Control and Monitoring 193
