Version Description8.3.2.0 Introduced on the E-Series TeraScale.Usage Information If no options are specified, debug is active on all interfaces and all VRRP groups.show vrrp ipv6View the IPv6 VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns NoActive VRRP group.C9000 SeriesSyntax show vrrp ipv6 [vrid] [interface] [brief][vrf vrf-name]Parameters vrid (OPTIONAL) Enter the virtual router identifier for the VRRP groupto view only that group. The range is from 1 to 255.interface Enter the following keywords and slot/port or numberinformation:• For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a VLAN interface, enter the keyword vlan then theVLAN ID. The VLAN ID range is from 1 to 4094.brief (OPTIONAL) Enter the keyword brief to view a table ofinformation on the VRRP groups.vrf vrf-name Enter the keyword vrf followed by the name of the VRF to viewIPv6 VRRP groups corresponding to that VRF.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, seethe relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version Description9.9(0.0) Introduced on the C9010.Virtual Router Redundancy Protocol (VRRP) 2259
